Biofloc C:N Ratio & Molasses Dosing: Stoichiometry and Oxygen Safety Limits
Why calculating carbohydrate doses solely by percentage of feed causes blind overdosing—and how combining water TAN, feed nitrogen, carbon fraction, and dissolved oxygen keeps biofloc stable.
Misjudging carbohydrate additions is one of the fastest ways to destabilize an intensive Biofloc pond. Under-dosing leaves Total Ammonia Nitrogen (TAN) unassimilated; blind over-dosing strips dissolved oxygen (DO) overnight as heterotrophic bacteria multiply faster than surface aerators can transfer oxygen.
1. Core Nitrogen & Carbon Mass-Balance Equations
The dosing model built into BioFloc Management tracks two distinct nitrogen sources: existing dissolved TAN in the water column and daily metabolic nitrogen excreted from feed protein.
Nwater = TAN (mg/L) × Tank Volume (L) / 1,000
Daily excreted feed nitrogen (g N):
Nfeed = Daily Feed (g) × (Feed Protein % / 100) × 0.16 × 0.50
(assuming ~16% nitrogen in crude protein and ~50% metabolic N excretion to water)
Corrective elemental carbon needed for measured water TAN (g C):
Cneeded = Nwater × Target C:N Ratio (e.g. 15 for routine maintenance, 20 for TAN spikes)
Carbohydrate source weight to apply (g):
Source Dose (g) = Cneeded / Carbon Fraction
2. Carbohydrate Carbon Fractions Compared
Not every carbon source contains the same fraction of elemental carbon. Using a 34% molasses weight when you actually substitute 44% starch changes the carbon loading by nearly 30%.
| Carbon Source | Carbon Fraction (by weight) | Dose per 100 g C Needed | Practical Pond Notes |
|---|---|---|---|
| Molasses (cane / beet) | 0.34 (34% C) | 294 g | Rapid dissolution when diluted 1:5–1:10; mixes potassium & trace minerals |
| White / raw sugar (sucrose) | 0.42 (42% C) | 238 g | Clean, fast-acting; watch rapid DO demand within 2–4 hours of dosing |
| Tapioca / corn starch | 0.44 (44% C) | 227 g | Slightly slower hydrolysis; disperse thoroughly to avoid bottom clumping |
| Wheat flour | 0.41 (41% C) | 244 g | Moderate release rate; useful when molasses supply is inconsistent |
| Glucose (dextrose) | 0.40 (40% C) | 250 g | Instant microbial uptake; reserve for controlled hatcheries/nurseries |
3. Worked Pond Example (20,000 L Nursery Tank)
Suppose a technician measures TAN = 1.2 mg/L in a 20,000 L (20 m³) vannamei or tilapia biofloc tank receiving 2,500 g/day of 32% crude protein feed, targeting a C:N ratio of 15:1 using cane molasses (34% C):
Nwater = 1.2 × 20,000 / 1,000 = 24.0 g NNfeed = 2,500 × 0.32 × 0.16 × 0.50 = 64.0 g N/day(showing how tomorrow's feed load contributes nearly 3× as much nitrogen as today's standing TAN)Cneeded (corrective) = 24.0 × 15 = 360 g CMolasses Dose = 360 / 0.34 = 1,059 g ≈ 1.06 kg molasses
In our field calculator, whenever a calculated single carbon dose exceeds 0.15 g of carbon substrate per liter (e.g. > 3.0 kg in a 20,000 L tank), a high-dose warning triggers. Adding large molasses doses in one slug—especially late in the afternoon—drives steep bacterial O₂ consumption overnight. Split large corrective doses into multiple daytime applications only while checking dissolved oxygen and Imhoff cone settleable solids (typically kept around 15–30 mL/L for fish, lower for delicate shrimp post-larvae).
4. Related Guides & Offline Pond Calculator
Read next: How pH and temperature shift your measured TAN into lethal free NH₃, or inspect our Biofloc vs. RAS engineering comparison.
Download BioFloc Management (11 languages) and AquaSim free on Google Play, or book a 1-on-1 engineering review.